features - high reliability for low cost - cheapest available smd-clock-oscillator - frequency stability to +-15 ppm available - supply voltage of 5.0, 3.3, 2.5 and 1.8 vdc available - new standard for small low cost oscillators - extended working temperature range to -40/+105c available smd-low-cost clock-oscillator series sxo-05032 package ceramic package 5.0 x 3.2 x 1.2 mm3 frequency range 5.0 volt 1.0 ~ 125.0 mhz 3.3 volt 1.0 ~ 125.0 mhz 1.8 volt 1.0 ~ 100.0 mhz frequency stability +-15 ~ +-100 ppm aging +-2 ppm max. per year operating temperature range -10/+60c ~ -40/+105c storage temperature range -55/+125c input voltage +1.8 vdc +-5% +3.3 vdc +-10% +5.0 vdc +-10% current 1.0 ~ 4.0 mhz = 10 ma ma x. 1.0 ~ 4.0 mhz = 10 ma max. 1.0 ~ 4.0 mhz = 10 ma max. 4.0 ~ 32.0 mhz = 20 ma ma x. 4.0 ~ 32.0 mhz = 20 ma max. 4.0 ~ 32.0 mhz = 30 ma max. 32.0 ~ 80.0 mhz = 30 ma m ax. 32.0 ~ 80.0 mhz = 30 ma max. 32.0 ~ 80.0 mhz = 45 ma max. 80.0 ~ 100.0 mhz = 40 ma m ax. 80.0 ~ 100.0 mhz = 40 ma max. 80.0 ~ 100.0 mhz = 80 ma max. lower input currents are available on request. please indicate the special value when required. output symmetry standard 40/60% option 45/55% rise and fall time 5 ns typical / 10 ns max. "0" level ttl 5 volt 0.4 v max. "1" level +2.4 v min. "0" level cmos 5 volt 10% vdd max. "1" level 90% vdd min. "0" level ttl 3.3 volt 0.4 v max. "1" level +1.4 v min. "0" level cmos 3.3 volt 10% vdd min. "1" level 90% vdd max. "0" level cmos 1.8 volt 10% vdd min. "1" level 90% vdd max. load ttl 1 ~ 10 ttl cmos 15 ~ 50 pf (1.8 vdc = 15 pf max.) pin 1 standard without enable/disable function option with enable/disable function other parameters are available on request / create here your specification rev.02 / march 2008 http://www.petermann-technik.com | info@petermann-technik.com
part numbering system example sxo3-05032-s-e-50-w-27.000mhz-t sxo-05032 for 5 volt sxo3-05032 for 3.3 volt series SXO18-05032 for 1.8 volt blank for 40/60% symmetry s for 45/55% pin 1 blank for no e/d enable/disable e for e/d blank for 100 ppm frequency stability any 15 ~ 50 ppm blank for 0/+70c n = -10/+60c m = -20/+70c w = -40/+85c temperature range y = -40/+105c frequency frequency in mhz tape and reel -t outline drawing of sxo-05032 3 . 2 + 0 . 2 - 5.0+0.2 - 1 . 2 + -0.2 1.2+0.1 #1 #2 #4 #3 1 . 2 + 0 . 1 2 . 4 1 . 2 cby=0.01f pin function #1 #2 #3 #4 not connected or enable / disable gnd output vcc unit:mm 1.4 2.54 - - 2.54 0 . 8 0.25+0.1 0.36+0.1 - - http://www.petermann-technik.com | info@petermann-technik.com
http://www.petermann-technik.com | info@petermann-technik.com test circuit cmos test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 c =15pf l note: cl includes probe and fixture capacitance v cc tri-state-input test circuit ttl test point + - ma m vm power supply + - + - 0,1f oscillator out gnd #1 #7 #8 #14 1n4148 or equiv tri-state-input note: cl includes probe and fixture capacitance v dd r =390 l c =15pf l output wave form cmos (cmos load) tr tf th t v ol duty=th/t v oh 90%v dd 50%v dd 10%v dd output wave form ttl (ttl load) tr tf th t v ol duty=th/t v oh 2.4v 1.4v 0.4v input current v dd 0.01~0.1f gnd 1 oe gnd 4 3 2 v dd out a reflow solder profile 260c 150c 25c ref low 1 to 9c/s preheating time (seconds) 60 200 10s max 1to5c /s t e m p e r a t u r e 1 to 5c/s cooling oscillators can be soldered according to the norm jedec j-std-020c . tape and reel dimensions pull direction 21 .0 +0 .8 - 13 .0 +0 .2 3. 5+ 0.1 8. 0+ 0.1 1. 5 1. 4 + 0.1 13 .0 +0 .3 16 .5 2.0+0.5 - - - - - - 0.3+ 0. 1 - 2. 0+ 0.1 - 4. 0+0.1 - 1. 5 1. 7 5 + 0 . 1 - 5. 5+ 0.1 - 5. 4+ 0.1 - 12 .0+0 . 2 - 60+ 5 - 180 -3 unit: mm +0 -1 +0 -1 +0 -1 +0.1
|
